Typical Tolerances for Silicone Injection Molded Parts

Silicone injection molding is used to create parts that require high precision and excellent material properties such as flexibility, heat resistance, and biocompatibility. The tolerances for silicone injection molded parts can vary depending on several factors including part size, geometry, and the specific application requirements. However, there are general guidelines and standards that can be referred to for typical tolerances.

General Tolerance Guidelines

ISO 3302-1:2014

• This international standard provides a framework for dimensional tolerances for rubber and thermoplastic elastomer products, which can be applied to silicone molded parts.

Molded Part Tolerances (General)

• Linear Dimensions:
  • For dimensions up to 10 mm: ±0.1 mm to ±0.2 mm
  • For dimensions between 10 mm and 100 mm: ±0.2 mm to ±0.3 mm
  • For dimensions greater than 100 mm: ±0.3 mm to ±0.5 mm
• Hole Diameters:
  • For hole diameters up to 10 mm: ±0.05 mm to ±0.1 mm
  • For hole diameters between 10 mm and 50 mm: ±0.1 mm to ±0.2 mm
  • For hole diameters greater than 50 mm: ±0.2 mm to ±0.3 mm
• Parting Line Mismatch:
  • Typically ±0.1 mm to ±0.2 mm
• Flash Tolerance:
  • Flash thickness generally should not exceed 0.1 mm.

https://www.youtube.com/watch?v=HaBGTzDK_yo

Factors Influencing Tolerances

1. Material Properties
   • Silicone’s inherent flexibility and compressibility can influence the achievable tolerances. Stiffer grades of silicone can allow for tighter tolerances compared to softer grades.
2. Mold Design and Quality
   • High-precision molds with tight tolerances are essential for achieving accurate silicone parts. Mold wear and maintenance also affect the consistency of tolerances over time.
3. Part Geometry
   • Complex geometries and thin-walled sections may have more relaxed tolerances compared to simpler, thicker-walled parts due to the challenges in controlling material flow and cooling.
4. Processing Conditions
   • Variations in injection molding parameters such as temperature, pressure, and injection speed can affect the final part dimensions. Consistent processing conditions help maintain tight tolerances.
5. Post-Molding Processes
   • Post-molding operations such as trimming, deburring, and secondary machining can influence final tolerances and are necessary to meet tighter specifications.

[elementor-template id=”4330″]

Practical Tolerance Ranges

For specific applications and industries, the tolerance requirements can be more stringent. Here are some examples:

• Medical Devices:
  • Typically require tighter tolerances due to the critical nature of the parts.
  • Tolerances: ±0.05 mm to ±0.1 mm for small, critical dimensions.
• Automotive Parts:
  • Require precision for fit and function, but may allow for slightly broader tolerances.
  • Tolerances: ±0.1 mm to ±0.2 mm for functional dimensions.
• Consumer Products:
  • May have more relaxed tolerances depending on the aesthetic and functional requirements.
  • Tolerances: ±0.2 mm to ±0.5 mm for larger, less critical dimensions.

Conclusion

The typical tolerances for silicone injection molded parts can vary based on several factors, including material properties, part geometry, mold quality, and specific industry requirements. Generally, for linear dimensions, tolerances range from ±0.1 mm to ±0.5 mm, with tighter tolerances achievable for smaller, critical dimensions. Understanding these tolerances and the factors that influence them is crucial for designing and manufacturing high-quality silicone parts.

Related Conten: Prototype Injection Molding